Aluminum Angle 6063-T52 Equal Leg

6063 extruded for architectural and ornamental applications. Highly corrosion resistant, with good formability, it is one of the most joinable alloys. Finish is pleasing and is the most suitable for anodizing.

ASTM-B-211 & QQ-A-200/9

Square Corners

Applications: 6063-T52 Aluminum Angle is heat treatable and widely used in applications where light to medium structural strength is sufficient. This is the perfect choice to use as trim or framing when unobstructed sharp corners are needed.

ANALYSIS	PERCENT by WEIGHT
Silicone	0.20/0.60
Iron	0.35
Copper	0.10
Manganese	0.10
Magnesium	0.45/0.90
Chromium	0.10
Zinc	0.10
Titanium	0.10
Aluminum	Remainder

6063-T52
Tensile Strength (psi) ………………….. 20,000
Yield Point (psi) ………………………….. 14,000
Elongation in 1″ ………………………….. 8% Min.

LEG LENGTH	THICKNESS	WEIGHT PER FOOT IN POUNDS	WEIGHT PER 16' LENGTH IN POUNDS	SKU
1/2" x 1/2"	1/16"	0.070	1.120	AA1212116T52
1/2" x 1/2"	1/8"	0.131	2.096	AA121218T52
3/4" x 3/4"	1/16"	0.108	1.728	AA3434116T52
3/4" x 3/4"	1/8"	0.206	3.296	AA343418T52
1" x 1"	1/16"	0.145	2.320	AA11116T52
1" x 1"	1/8"	0.281	4.496	AA1118T52
1-1/4" x 1-1/4"	1/8"	0.356	5.696	AA11411418T52
1-1/2" x 1-1/2"	1/16"	0.220	3.520	AA112112116T52
1-1/2" x 1-1/2"	1/8"	0.431	6.869	AA11211218T52
2" x 2"	1/8"	0.581	9.296	AA2218T52
2" x 2"	3/16"	0.857	13.710	AA22316T52
2" x 2"	1/4"	1.120	17.920	AA2214T52

Aluminum Angle 6063-T52 Equal Leg

Related products

ER5356, .030″ x 1 lb., Aluminum MIG Welding Wire

Aluminum Flat Bar 6061-T6511

Aluminum Anti-Seize 8 oz.

Aluminum Strap Wrench 5″ Pipe Capacity